The Plate,mounting, cataloged under National Stock Number 5340-01-473-1296, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. Government technical data includes 10 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5340-01-473-1296 |
| Item Name | Plate,mounting |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Status | ACTIVE |
| Mounting Hole Quantity | 1 |
| Length | 1.500 INCHES NOMINAL1.500 INCHES NOMINAL IN |
| Material Document and Classification | QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE |
| Mounting Hole Diameter | 0.260 INCHES MINIMUM AND 0.267 INCHES MAXIMUM ALL HOLES IN |
| Shape | OVAL |
| Features Provided | APERTURE |
| Width | 0.500 INCHES NOMINAL0.500 INCHES NOMINAL IN |
| Material | ALUMINUM ALLOY 2024 |
| Thickness | 0.040 INCHES NOMINAL0.040 INCHES NOMINAL IN |
| Aperture Shape | ROUND |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 7-311B25125 | D/9 Drawing number reference only The Boeing Company |
| 7-311B25125-7 | 3/9 Design control — primary reference The Boeing Company |
NSN 5340-01-473-1296 is a Plate,mounting, classified under FSC 5340, Hardware, Commercial. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5340-01-473-1300. Verify interchangeability with system specifications before substitution.
Key specifications for 5340-01-473-1296: Mounting Hole Quantity: 1; Length: 1.500 INCHES NOMINAL1.500 INCHES NOMINAL IN; Material Document and Classification: QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE; Mounting Hole Diameter: 0.260 INCHES MINIMUM AND 0.267 INCHES MAXIMUM ALL HOLES IN. 10 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.