The Standoff,threaded,snap-in, cataloged under National Stock Number 5340-01-448-3222, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. Government technical data includes 27 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-01-448-3222 |
| Item Name | Standoff,threaded,snap-in |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Status | ACTIVE |
| Length | 4.000 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | QQ-P-35,TYPE II FED SPEC SINGLE TREATMENT RESPONSE STANDOFF |
| Special Test Features | SPECIAL QUALITY CONTROL TESTING |
| Thread Length | 0.265 INCHES NOMINAL LEFT EXTERNAL IN |
| Criticality Code Justification | ZZZY |
| Style Designator | LEFT INTERNAL AND RIGHT EXTERNAL THREAD |
| Material Document and Classification | STM A581 ASSN STD SINGLE MATERIAL RESPONSE STANDOFF |
| Right End Chamfer Angle | 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM |
| Projection.left Chamfer Angle | 45.0 DEGREES NOMINAL |
| Thread Direction | RIGHT-HAND RIGHT INTERNAL |
| Thread Direction | LEFT-HAND LEFT EXTERNAL |
| Nominal Thread Size | 0.138 INCHES RIGHT INTERNAL IN |
| Nominal Thread Size | 0.190 INCHES LEFT EXTERNAL IN |
| Departure From Cited Document | AS MODIFIED BY MATERIAL AND LOCKING FEATURE( AS APPLICABLE ) |
| Width Between Flats | 0.375 INCHES NOMINAL IN |
| Surface Treatment | PASSIVATE STANDOFF |
| Thread Class | 2A LEFT EXTERNAL A |
| Thread Class | 2B RIGHT INTERNAL |
| Test Data Document | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Thread Quantity Per Inch | 32 RIGHT INTERNAL |
| Thread Quantity Per Inch | 32 LEFT EXTERNAL |
| Material | STEEL COMP 303 STANDOFF |
| Right Projection Diameter | 0.190 INCHES NOMINAL IN |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) RIGHT INTERNAL |
| Thread Series Designator | UNF LEFT EXTERNAL |
| Right Projection Length | 0.374 INCHES NOMINAL IN |
| Reference Number Differentiating Characteristics | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | S |
| Unit of Issue | EA |
| Reference | Meaning |
|---|---|
| 18-3137 | 3/1 Design control — primary reference Drs Naval Power Systems Inc Dba Drs Power & Control Technologies Inc |
NSN 5340-01-448-3222 is a Standoff,threaded,snap-in, classified under FSC 5340, Hardware, Commercial. Status: active.
Key specifications for 5340-01-448-3222: Length: 4.000 INCHES NOMINAL IN; Surface Treatment Document and Classification: QQ-P-35,TYPE II FED SPEC SINGLE TREATMENT RESPONSE STANDOFF; Special Test Features: SPECIAL QUALITY CONTROL TESTING; Thread Length: 0.265 INCHES NOMINAL LEFT EXTERNAL IN. 27 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.