The Bracket,angle, cataloged under National Stock Number 5340-01-413-9812, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. Government technical data includes 28 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-01-413-9812 |
| Item Name | Bracket,angle |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Status | ACTIVE |
| Second Leg Distance From Edge to Hole Center Along Length | 0.148 INCHES NOMINAL IN |
| First Leg Distance From Edge to Hole Center Along Length | 0.271 INCHES NOMINAL IN |
| First Leg Angle | 0.094 RADIANS NOMINAL |
| Second Leg Relationship to First Leg | NOT IDENTICAL |
| Second Leg Hole Diameter | 0.161 INCHES MINIMUM AND 0.171 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35, TYPE VII (F-16, MTHD 12) FED SPEC SINGLE TREATMENT RESPONSE |
| Second Leg Cutout Width | 0.610 INCHES NOMINAL IN |
| Second Leg Cutout Length | 0.440 INCHES NOMINAL IN |
| Second Leg Width | 1.210 INCHES NOMINAL IN |
| Second Leg Length | 0.715 INCHES NOMINAL IN |
| First Leg Hole Arrangement Style | ONE SLOT |
| First Leg End Width | 1.198 INCHES NOMINAL IN |
| Style Designator | ANGLE |
| First Leg Style | CHAMFERED ENDS |
| Material Document and Classification | QQ-S-766 TYPE 304, COND A FED SPEC SINGLE MATERIAL RESPONSE |
| Second Leg Thickness | 0.094 INCHES NOMINAL IN |
| First Leg Distance From Edge to Hole Center Along Width | 0.605 INCHES NOMINAL IN |
| First Leg Thickness | 0.094 INCHES NOMINAL IN |
| First Leg Slot Width | 0.308 INCHES NOMINAL IN |
| First Leg Length | 0.650 INCHES NOMINAL IN |
| First Leg Width | 1.210 INCHES NOMINAL IN |
| First Leg Chamfer Angle | 45.0 DEGREES NOMINAL |
| First Leg Slot Length | 0.581 INCHES MINIMUM AND 0.591 INCHES MAXIMUM IN |
| Second Leg Style | CUT OUT |
| Surface Treatment | PASSIVATE |
| Material | STEEL COMP 304 |
| Second Leg Hole Arrangement Style | TWO HOLES |
| Second Leg Distance Between Hole Centers Along Width | 0.910 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Reference | Meaning |
|---|---|
| 3140223-1 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5340-01-413-9812 is a Bracket,angle, classified under FSC 5340, Hardware, Commercial. Status: active.
Key specifications for 5340-01-413-9812: Second Leg Distance From Edge to Hole Center Along Length: 0.148 INCHES NOMINAL IN; First Leg Distance From Edge to Hole Center Along Length: 0.271 INCHES NOMINAL IN; First Leg Angle: 0.094 RADIANS NOMINAL; Second Leg Relationship to First Leg: NOT IDENTICAL. 28 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.