The Fastener,pawl, cataloged under National Stock Number 5340-01-374-9395, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-01-374-9395 |
| Item Name | Fastener,pawl |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Status | ACTIVE |
| Operational Direction | RIGHT-HAND |
| Length | 1.750 INCHES NOMINAL IN |
| Center to Center Distance Between Mounting Holes | 1.250 INCHES NOMINAL IN |
| Pawl Actuation Method | KEY |
| Style Designator | KNURLED |
| Mounting Hole Diameter | 0.193 INCHES NOMINAL IN |
| Diameter | 0.500 INCHES NOMINAL IN |
| Pawl Type | OFFSET |
| Height | 0.875 INCHES NOMINAL IN |
| Surface Treatment | ZINC BOLT |
| Surface Treatment | PASSIVATE SPRING |
| Width | 1.454 INCHES NOMINAL IN |
| Material | STEEL COMP 302 SPRING |
| Material | STEEL BOLT |
| Material | STEEL COMP 1010 HOUSING |
| Material | STEEL COMP 1010 LATCH BAR |
| Pawl Length From Actuating Shaft Center to Pawl End | 1.000 INCHES NOMINAL IN |
| Pawl Swing Angle | 120.0 DEGREES NOMINAL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Reference | Meaning |
|---|---|
| 44-1-22-0 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5340-01-374-9395 is a Fastener,pawl, classified under FSC 5340, Hardware, Commercial. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 2520-01-491-3619. Verify interchangeability with system specifications before substitution.
Key specifications for 5340-01-374-9395: Operational Direction: RIGHT-HAND; Length: 1.750 INCHES NOMINAL IN; Center to Center Distance Between Mounting Holes: 1.250 INCHES NOMINAL IN; Pawl Actuation Method: KEY. 18 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.