The Plate,mounting, cataloged under National Stock Number 5340-01-369-7939, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. Government technical data includes 12 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-01-369-7939 |
| Item Name | Plate,mounting |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Status | ACTIVE |
| Mounting Hole Quantity | 2 |
| Length | 0.9000 INCHES MINIMUM AND 0.9000 INCHES MINIMUM AND 0.9200 INCHES MAXIMUM0.9200 INCHES MAXIMUM IN |
| Material Document and Classification | QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE |
| Mounting Hole Diameter | 0.1380 INCHES NOMINAL ALL HOLES IN |
| Shape | RECTANGULAR |
| Nondefinitive Spec/std Data | T-4 TREATMENT |
| Thread Size | 6-32 |
| Screw Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Width | 0.2350 INCHES MINIMUM AND 0.2350 INCHES MINIMUM AND 0.2450 INCHES MAXIMUM0.2450 INCHES MAXIMUM IN |
| Material | ALUMINUM ALLOY 2024 |
| Thickness | 0.1600 INCHES MINIMUM AND 0.1600 INCHES MINIMUM AND 0.1700 INCHES MAXIMUM0.1700 INCHES MAXIMUM IN |
| Mounting Hole Type | THREADED |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Reference | Meaning |
|---|---|
| 172B4027G1 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5340-01-369-7939 is a Plate,mounting, classified under FSC 5340, Hardware, Commercial. Status: active.
Key specifications for 5340-01-369-7939: Mounting Hole Quantity: 2; Length: 0.9000 INCHES MINIMUM AND 0.9000 INCHES MINIMUM AND 0.9200 INCHES MAXIMUM0.9200 INCHES MAXIMUM IN; Material Document and Classification: QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE; Mounting Hole Diameter: 0.1380 INCHES NOMINAL ALL HOLES IN. 12 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.