The Plunger,detent, cataloged under National Stock Number 5340-01-365-1957, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. The manufacturer of record is General Electric Company. Government technical data includes 4 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-01-365-1957 |
| Primary Part Number | 9911M33P07 |
| Item Name | Plunger,detent |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Manufacturer | General Electric Company |
| Status | ACTIVE |
| Length | 2.280 INCHES MINIMUM AND 2.320 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN |
| Diameter | 0.580 INCHES MINIMUM AND 0.620 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN |
| Test Data Document | 07482-+3TF2CLA SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Material | NICKEL ALLOY OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Part Number | Manufacturer |
|---|---|
| 9911M33P07 PRIMARY | General Electric Company (USA) |
| Reference | Meaning |
|---|---|
| PL 9911M34 ITEM 8 P07 | 5/1 Secondary reference General Electric Company |
NSN 5340-01-365-1957 is a Plunger,detent, manufactured by General Electric Company, classified under FSC 5340, Hardware, Commercial. Status: active.
NSN 5340-01-365-1957 has 1 manufacturer part number on file: 9911M33P07 (General Electric Company).
Key specifications for 9911M33P07: Length: 2.280 INCHES MINIMUM AND 2.320 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN; Diameter: 0.580 INCHES MINIMUM AND 0.620 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN; Special Features: 1/4" ID,7/8 DP,CBORED; END FLG 11/16" DIA; NOSE 9/32" DIA; Test Data Document: 07482-+3TF2CLA SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).. 4 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.