The Clamp,block, cataloged under National Stock Number 5340-01-280-6983, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-01-280-6983 |
| Item Name | Clamp,block |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Status | ACTIVE |
| Mounting Hole Quantity | 22 |
| Clamping Hole Quantity | 1 |
| Distance From End to First Clamping Hole Center | 1.380 INCHES NOMINAL IN |
| Block Height | 1.120 INCHES NOMINAL1.120 INCHES NOMINAL IN |
| Style Designator | RECTANGULAR |
| Mounting Hole Diameter | 0.438 INCHES NOMINAL0.438 INCHES NOMINAL IN |
| Clamping Hole Diameter | 1.281 INCHES NOMINAL ALL HOLES IN |
| Cable Diameter for Which Designed | 1.060 INCHES NOMINAL ALL HOLES IN |
| Distance From Center of Mounting Hole to Edge Along the Width | 0.310 INCHES NOMINAL0.310 INCHES NOMINAL IN |
| Distance From End to First Mounting Hole Center | 0.380 INCHES NOMINAL IN |
| Mounting Facility | UNTHREADED HOLE(S)UNTHREADED HOLE(S) |
| Center to Center Distance Between First and Second Mounting Holes | 2.000 INCHES NOMINAL2.000 INCHES NOMINAL IN |
| Surface Treatment | ZINC |
| Material | STEEL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Reference | Meaning |
|---|---|
| 2445498 ASSY NH 0.75INIPS 1 HOLE | 3/2 Design control — primary reference U.S. Government activity |
NSN 5340-01-280-6983 is a Clamp,block, classified under FSC 5340, Hardware, Commercial. Status: active.
Key specifications for 5340-01-280-6983: Mounting Hole Quantity: 22; Overall Height: 2.250 INCHES NOMINAL2.250 INCHES NOMINAL IN; Clamping Hole Quantity: 1; Distance From End to First Clamping Hole Center: 1.380 INCHES NOMINAL IN. 14 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.