The Clamp,loop, cataloged under National Stock Number 5340-01-270-6771, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. Government technical data includes 10 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-01-270-6771 |
| Item Name | Clamp,loop |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Status | ACTIVE |
| Cushioning Environmental Protection | HYDRAULIC FLUID AND FUEL RESISTANT AND OZONE RESISTANT |
| Style Designator | OFFSET MOUNT |
| Diameter | 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN |
| Material Thickness | 0.032 INCHES NOMINAL IN |
| Distance From Loop Center to Tongue End | 1.562 INCHES MINIMUM AND 1.622 INCHES MAXIMUM IN |
| Tongue Hole Type | ROUND, UNTHREADED |
| Center to Center Distance Between Loop and Mounting Hole | 1.359 INCHES MINIMUM AND 1.389 INCHES MAXIMUM IN |
| Material | RUBBER CUSHION |
| Material | STEEL CORROSION RESISTING BAND |
| Loop Inside Diameter | 1.798 INCHES MINIMUM AND 1.828 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Reference | Meaning |
|---|---|
| MS21919WCG29 | 2/2 Government specification standardization U.S. Government activity |
| MIL-C-8603 | 5/9 Secondary reference U.S. Government activity |
| MIL-DTL-8603 | 4/1 Identification reference U.S. Government activity |
NSN 5340-01-270-6771 is a Clamp,loop, classified under FSC 5340, Hardware, Commercial. Status: active.
Key specifications for 5340-01-270-6771: Cushioning Environmental Protection: HYDRAULIC FLUID AND FUEL RESISTANT AND OZONE RESISTANT; Style Designator: OFFSET MOUNT; Diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN; Overall Width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN. 10 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.