The Retainer,nut and Bolt, cataloged under National Stock Number 5340-01-269-4176, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. The manufacturer of record is Curtiss-Wright Controls, Inc. Div Actuation Division. Government technical data includes 8 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-01-269-4176 |
| Primary Part Number | 183098-1 |
| Item Name | Retainer,nut and Bolt |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Manufacturer | Curtiss-Wright Controls, Inc. Div Actuation Division |
| Status | ACTIVE |
| Distance Between Mounting Hole Centers | 0.241 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN |
| Style Designator | ANCHOR |
| Material Document and Classification | AMS 6350 ASSN STD 1ST MATERIAL RESPONSE AND AMS 5085 ASSN STD 2ND MATERIAL RESPONSE |
| Mounting Hole Diameter | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN |
| Material Thickness | 0.032 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN |
| Center to Center Distance Between Cup and Mounting Hole | 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE |
| Material | STEEL COMP 4130 OR STEEL COMP 1050 |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
NSN 5340-01-269-4176 is a Retainer,nut and Bolt, manufactured by Curtiss-Wright Controls, Inc. Div Actuation Division, classified under FSC 5340, Hardware, Commercial. Status: active.
NSN 5340-01-269-4176 has 2 manufacturer part numbers on file: 183098-1 (Curtiss-Wright Controls, Inc. Dba Curtiss Wright Div Actuation Division), 183098-1 (Curtiss-Wright Controls, Inc. Div Actuation Division).
Key specifications for 183098-1: Distance Between Mounting Hole Centers: 0.241 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN; Style Designator: ANCHOR; Material Document and Classification: AMS 6350 ASSN STD 1ST MATERIAL RESPONSE AND AMS 5085 ASSN STD 2ND MATERIAL RESPONSE; Mounting Hole Diameter: 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN. 8 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.