The Clevis,rod End, cataloged under National Stock Number 5340-01-259-8411, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. Government technical data includes 8 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-01-259-8411 |
| Item Name | Clevis,rod End |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Status | ACTIVE |
| Fork Span Width | 1.625 INCHES NOMINAL IN |
| Fork Arm Thickness | 0.190 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Material Document and Classification | QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Surface Treatment | PASSIVATE OVERALL |
| Material | STEEL COMP 304 OVERALL |
| Hole Diameter | 0.256 INCHES MINIMUM AND 0.263 INCHES MAXIMUM IN |
| Distance From Pivot Pinhole Center to Rod Connection End | 2.260 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Reference | Meaning |
|---|---|
| 863T2100052-002 | 3/9 Design control — primary reference Lockheed Martin Corp |
| 863T2100052 | D/9 Drawing number reference only Lockheed Martin Corp |
NSN 5340-01-259-8411 is a Clevis,rod End, classified under FSC 5340, Hardware, Commercial. Status: active.
2 possible matches (shared part number, not a government interchangeability claim): 5340-01-259-8438, 5340-01-259-8439. Verify interchangeability with system specifications before substitution.
Key specifications for 5340-01-259-8411: Overall Height: 1.180 INCHES NOMINAL IN; Fork Span Width: 1.625 INCHES NOMINAL IN; Fork Arm Thickness: 0.190 INCHES NOMINAL IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 8 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.