The Clamp,loop, cataloged under National Stock Number 5340-01-258-0912, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. Government technical data includes 13 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5340-01-258-0912 |
| Item Name | Clamp,loop |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Status | ACTIVE |
| Lug Hole Diameter | 0.199 INCHES NOMINAL IN |
| Center to Center Distance Between Loop and Lug Hole | 0.796 INCHES NOMINAL IN |
| Distance From Outer Edge of Lug to Hole Center | 0.250 INCHES NOMINAL IN |
| Style Designator | RIGHT HAND CLAMP & BRACKET |
| Material Document and Classification | AMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION |
| Material Document and Classification | QQ-A-250/5,T4 FED SPEC SINGLE MATERIAL RESPONSE BAND |
| Material Thickness | 0.051 INCHES NOMINAL IN |
| Lug Width | 0.500 INCHES NOMINAL IN |
| Distance From Loop Center to Tongue End | 0.984 INCHES NOMINAL IN |
| Center to Center Distance Between Loop and Mounting Hole | 0.734 INCHES NOMINAL IN |
| Material | ALUMINUM ALLOY 2024 BAND |
| Material | RUBBER CHLOROPRENE CLASS CR CUSHION |
| Loop Inside Diameter | 0.625 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 794-10R2 | 3/2 Design control — primary reference U.S. Government activity |
| BACC10K10R | 5/2 Secondary reference U.S. Government activity |
NSN 5340-01-258-0912 is a Clamp,loop, classified under FSC 5340, Hardware, Commercial. Status: active.
Key specifications for 5340-01-258-0912: Lug Hole Diameter: 0.199 INCHES NOMINAL IN; Center to Center Distance Between Loop and Lug Hole: 0.796 INCHES NOMINAL IN; Distance From Outer Edge of Lug to Hole Center: 0.250 INCHES NOMINAL IN; Style Designator: RIGHT HAND CLAMP & BRACKET. 13 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.