The Clamp,loop, cataloged under National Stock Number 5340-01-252-7301, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. The manufacturer of record is Lockheed Martin Corporation Div Rms. Government technical data includes 7 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5340-01-252-7301 |
| Primary Part Number | 77C718631P001 |
| Item Name | Clamp,loop |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Manufacturer | Lockheed Martin Corporation Div Rms |
| Status | ACTIVE |
| Style Designator | SINGLE LOOP |
| Diameter | 0.112 INCHES NOMINAL IN |
| Material Thickness | 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN |
| Distance From Loop Center to Tongue End | 0.4375 INCHES MAXIMUM IN |
| Tongue Hole Type | ROUND, UNTHREADED |
| Material | PLASTIC POLYAMIDE NYLON OVERALL |
| Loop Inside Diameter | 0.125 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 77C718631P001 PRIMARY | Lockheed Martin Corporation Div Rms (USA) |
| Reference | Meaning |
|---|---|
| P-CLIP NO. 0 | 7/9 Vendor item drawing reference Wieland Inc |
NSN 5340-01-252-7301 is a Clamp,loop, manufactured by Lockheed Martin Corporation Div Rms, classified under FSC 5340, Hardware, Commercial. Status: active.
NSN 5340-01-252-7301 has 1 manufacturer part number on file: 77C718631P001 (Lockheed Martin Corporation Div Rms).
Key specifications for 77C718631P001: Style Designator: SINGLE LOOP; Diameter: 0.112 INCHES NOMINAL IN; Overall Width: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN; Material Thickness: 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN. 7 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.