The Clevis,rod End, cataloged under National Stock Number 5340-01-195-8587, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5340-01-195-8587 |
| Item Name | Clevis,rod End |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Status | ACTIVE |
| Shank Diameter | 0.250 INCHES NOMINAL IN |
| Fork Span Width | 0.172 INCHES NOMINAL IN |
| Fork Arm Thickness | 0.156 INCHES NOMINAL IN |
| Distance From Pivot Pinhole Center to Fork End | 0.250 INCHES NOMINAL IN |
| Thread Length | 0.891 INCHES MINIMUM AND 0.922 INCHES MAXIMUM ROD CONNECTION IN |
| Style Designator | CLEVIS |
| Material Document and Classification | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL |
| Thread Direction | RIGHT-HAND ROD CONNECTION |
| Nominal Thread Size | 0.250 INCHES ROD CONNECTION IN |
| Thread Class | 3A ROD CONNECTION A |
| Material | STEEL COMP 4130 OR STEEL COMP 4340 OVERALL |
| Thread Series Designator | UNF ROD CONNECTION |
| Fork Depth | 0.850 INCHES NOMINAL IN |
| Hole Diameter | 0.190 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN |
| Distance From Pivot Pinhole Center to Rod Connection End | 2.750 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL B — Remove Demilitarization Key Points |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 66-18677-1 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5340-01-195-8587 is a Clevis,rod End, classified under FSC 5340, Hardware, Commercial. Status: active.
Key specifications for 5340-01-195-8587: Shank Diameter: 0.250 INCHES NOMINAL IN; Fork Span Width: 0.172 INCHES NOMINAL IN; Fork Arm Thickness: 0.156 INCHES NOMINAL IN; Distance From Pivot Pinhole Center to Fork End: 0.250 INCHES NOMINAL IN. 15 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
NSN 5340-01-195-8587 has DEMIL Code B. Demilitarization may be required before disposal or transfer to non-military entities.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.