The Clamp,loop, cataloged under National Stock Number 5340-01-191-4635, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. Government technical data includes 9 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-01-191-4635 |
| Item Name | Clamp,loop |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Status | ACTIVE |
| Special Test Features | CAPABLE OF WITHSTANDING HUMIDITIES UP TO 100 PERCENT; 48 HOUR SALT SPRAY TEST |
| Style Designator | SINGLE LOOP |
| Diameter | 0.086 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN |
| Material Thickness | 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN |
| Distance From Loop Center to Tongue End | 0.317 INCHES MINIMUM AND 0.337 INCHES MAXIMUM IN |
| Tongue Hole Type | ROUND, UNTHREADED |
| Center to Center Distance Between Loop and Mounting Hole | 0.192 INCHES MINIMUM AND 0.212 INCHES MAXIMUM IN |
| Material | PLASTIC POLYAMIDE NYLON OVERALL |
| Loop Inside Diameter | 0.075 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Reference | Meaning |
|---|---|
| 952526-2 | 7/2 Vendor item drawing reference Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp |
| 3132-J | 3/2 Design control — primary reference U.S. Government activity |
NSN 5340-01-191-4635 is a Clamp,loop, classified under FSC 5340, Hardware, Commercial. Status: active.
Key specifications for 5340-01-191-4635: Special Test Features: CAPABLE OF WITHSTANDING HUMIDITIES UP TO 100 PERCENT; 48 HOUR SALT SPRAY TEST; Style Designator: SINGLE LOOP; Diameter: 0.086 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN; Overall Width: 0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN. 9 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.