The Clamp,block,section, cataloged under National Stock Number 5340-01-179-4110, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. Government technical data includes 12 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: AY.
| Parameter | Value |
|---|---|
| NSN | 5340-01-179-4110 |
| Item Name | Clamp,block,section |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Status | ACTIVE |
| Clamping Hole Quantity | 33 |
| Distance From End to First Clamping Hole Center | 1.120 INCHES NOMINAL IN |
| Block Height | 0.720 INCHES MINIMUM AND 0.720 INCHES MINIMUM AND 2.030 INCHES MAXIMUM2.030 INCHES MAXIMUM IN |
| Style Designator | RECTANGULAR |
| Clamping Hole Diameter | 0.860 INCHES NOMINAL FIRST HOLE IN |
| Clamping Hole Diameter | 1.410 INCHES NOMINAL SECOND HOLE IN |
| Clamping Hole Diameter | 1.710 INCHES NOMINAL THIRD HOLE IN |
| Center to Center Distance Between First and Sixth Clamping Holes | 3.500 INCHES NOMINAL IN |
| Distance From Center of Mounting Hole to Edge Along the Width | 0.500 INCHES NOMINAL0.500 INCHES NOMINAL IN |
| Distance From End to First Mounting Hole Center | 2.245 INCHES NOMINAL IN |
| Center to Center Distance Between First and Fifth Clamping Holes | 2.250 INCHES NOMINAL IN |
| Material | ALUMINUM ALLOY 6061 |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | AY |
| Reference | Meaning |
|---|---|
| 13204E2549 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5340-01-179-4110 is a Clamp,block,section, classified under FSC 5340, Hardware, Commercial. Status: active.
Key specifications for 5340-01-179-4110: Clamping Hole Quantity: 33; Distance From End to First Clamping Hole Center: 1.120 INCHES NOMINAL IN; Block Height: 0.720 INCHES MINIMUM AND 0.720 INCHES MINIMUM AND 2.030 INCHES MAXIMUM2.030 INCHES MAXIMUM IN; Style Designator: RECTANGULAR. 12 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.