The Clamp,loop, cataloged under National Stock Number 5340-01-162-4121, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. Government technical data includes 10 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-01-162-4121 |
| Item Name | Clamp,loop |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Status | ACTIVE |
| Style Designator | OFFSET MOUNT |
| Material Document and Classification | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN |
| Material Thickness | 0.029 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN |
| Distance From Loop Center to Tongue End | 0.714 INCHES MINIMUM AND 0.744 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Tongue Hole Type | ROUND, UNTHREADED |
| Center to Center Distance Between Loop and Mounting Hole | 0.526 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN |
| Material | STEEL OVERALL |
| Loop Inside Diameter | 0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Reference | Meaning |
|---|---|
| 59087-7 | 1/2 Source control — Government-approved source U.S. Government activity |
| TA713SS07T | 3/2 Design control — primary reference U.S. Government activity |
NSN 5340-01-162-4121 is a Clamp,loop, classified under FSC 5340, Hardware, Commercial. Status: active.
Key specifications for 5340-01-162-4121: Style Designator: OFFSET MOUNT; Material Document and Classification: MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL; Diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN; Overall Width: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN. 10 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.