The Clip,spring Tension, cataloged under National Stock Number 5340-01-159-4008, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. Government technical data includes 8 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-01-159-4008 |
| Item Name | Clip,spring Tension |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Status | ACTIVE |
| Length | 0.410 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Mounting Method | UNTHREADED HOLE(S) |
| Loop/holding Dimension | 0.381 INCHES MINIMUM AND 0.401 INCHES MAXIMUM IN |
| Material Thickness | 0.015 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN |
| Distance From Loop Center to End | 0.240 INCHES NOMINAL IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Width | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Reference | Meaning |
|---|---|
| M24066/2-222 | 3/2 Design control — primary reference U.S. Government activity |
| M24066/2-222 | 5/9 Secondary reference U.S. Government activity |
| NASM24066/2 | 3/1 Design control — primary reference U.S. Government activity |
| MIL-C-24066/2 | 5/9 Secondary reference U.S. Government activity |
NSN 5340-01-159-4008 is a Clip,spring Tension, classified under FSC 5340, Hardware, Commercial. Status: active.
Key specifications for 5340-01-159-4008: Overall Height: 0.460 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN; Length: 0.410 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Mounting Method: UNTHREADED HOLE(S). 8 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.