The Bracket,angle, cataloged under National Stock Number 5340-01-152-7550, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. The manufacturer of record is General Electric Company. Government technical data includes 13 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5340-01-152-7550 |
| Primary Part Number | L24068P002A |
| Item Name | Bracket,angle |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Manufacturer | General Electric Company |
| Status | ACTIVE |
| First Leg Hole Diameter | 0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN |
| First Leg Angle | 120.0 DEGREES MINIMUM AND 124.0 DEGREES MAXIMUM |
| Second Leg Relationship to First Leg | NOT IDENTICAL |
| Second Leg Hole Diameter | 0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN |
| First Leg Hole Arrangement Style | TWO HOLES |
| Style Designator | OFFSET ANGLE |
| First Leg Style | SIDE RADIUS |
| Material Document and Classification | AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| Second Leg Thickness | 0.083 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN |
| First Leg Thickness | 0.083 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN |
| Second Leg Style | END RADIUS |
| Material | STEEL COMP 321 |
| Second Leg Hole Arrangement Style | ONE HOLE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| L24068P002A PRIMARY | General Electric Company (USA) |
NSN 5340-01-152-7550 is a Bracket,angle, manufactured by General Electric Company, classified under FSC 5340, Hardware, Commercial. Status: active.
NSN 5340-01-152-7550 has 1 manufacturer part number on file: L24068P002A (General Electric Company).
Key specifications for L24068P002A: First Leg Hole Diameter: 0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN; First Leg Angle: 120.0 DEGREES MINIMUM AND 124.0 DEGREES MAXIMUM; Second Leg Relationship to First Leg: NOT IDENTICAL; Second Leg Hole Diameter: 0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN. 13 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.