The Plunger,detent, cataloged under National Stock Number 5340-01-116-9264, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. The manufacturer of record is Naval Sea Systems Command. Government technical data includes 4 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-01-116-9264 |
| Primary Part Number | 709-4684893 ITEM 9 |
| Item Name | Plunger,detent |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Manufacturer | Naval Sea Systems Command |
| Status | ACTIVE |
| Length | 1.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN |
| Material Document and Classification | QQ-B-750,COMP A HARD FED SPEC SINGLE MATERIAL RESPONSE |
| Diameter | 0.558 INCHES MINIMUM AND 0.560 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN |
| Material | COPPER ALLOY 510 LOCATION NOT OTHERWISE SPECIFIED |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Part Number | Manufacturer |
|---|---|
| 709-4684893 ITEM 9 | Naval Sea Systems Command (USA) |
| Reference | Meaning |
|---|---|
| 87832-1622 ITEM 9 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5340-01-116-9264 is a Plunger,detent, manufactured by Naval Sea Systems Command, classified under FSC 5340, Hardware, Commercial. Status: active.
NSN 5340-01-116-9264 has 1 manufacturer part number on file: 709-4684893 ITEM 9 (Naval Sea Systems Command).
Key specifications for 709-4684893 ITEM 9: Length: 1.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN; Material Document and Classification: QQ-B-750,COMP A HARD FED SPEC SINGLE MATERIAL RESPONSE; Diameter: 0.558 INCHES MINIMUM AND 0.560 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN; Material: COPPER ALLOY 510 LOCATION NOT OTHERWISE SPECIFIED. 4 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.