The Bumper, cataloged under National Stock Number 5340-01-095-5010, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. The manufacturer of record is Unison Industries Llc. Government technical data includes 7 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-01-095-5010 |
| Primary Part Number | 97109 |
| Item Name | Bumper |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Manufacturer | Unison Industries Llc |
| Status | ACTIVE |
| Outside/top Flange Diameter | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| First Counterbore Diameter | 0.230 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN |
| Style Designator | FLAT TOP COUNTERBORED |
| Material Document and Classification | UNISON INDUSTRIES LLC, CAGE 83311, SILASTIC 1602 MFR REF SINGLE MATERIAL RESPONSE |
| First Counterbore Depth | 0.155 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN |
| Material | RUBBER SYNTHETIC |
| Hole Diameter | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Part Number | Manufacturer |
|---|---|
| 97109 PRIMARY | Unison Industries Llc (USA) |
| Reference | Meaning |
|---|---|
| 97109 | 5/9 Secondary reference U.S. Government activity |
NSN 5340-01-095-5010 is a Bumper, manufactured by Unison Industries Llc, classified under FSC 5340, Hardware, Commercial. Status: active.
NSN 5340-01-095-5010 has 1 manufacturer part number on file: 97109 (Unison Industries Llc).
Key specifications for 97109: Overall Height: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN; Outside/top Flange Diameter: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN; First Counterbore Diameter: 0.230 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN; Style Designator: FLAT TOP COUNTERBORED. 7 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.