The Retainer,nut and Bolt, cataloged under National Stock Number 5340-01-050-7032, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. Government technical data includes 9 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-01-050-7032 |
| Item Name | Retainer,nut and Bolt |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Status | ACTIVE |
| Surface Treatment Document and Classification | MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE |
| Distance Between Mounting Hole Centers | 2.390 INCHES MINIMUM AND 2.410 INCHES MAXIMUM IN |
| Material Document and Classification | QQ-A-250/5, ALLOY ALCLAD 2024, T3 FED SPEC SINGLE MATERIAL RESPONSE |
| Mounting Hole Diameter | 0.281 INCHES MINIMUM AND 0.307 INCHES MAXIMUM IN |
| Material Thickness | 0.064 INCHES NOMINAL IN |
| Center to Center Distance Between Cup and Mounting Hole | 1.190 INCHES MINIMUM AND 1.210 INCHES MAXIMUM IN |
| Surface Treatment | ANODIZE OR CHROMATE |
| Material | ALUMINUM ALLOY 2024 AND ALUMINUM ALLOY 1230 |
| Width Between Cup Flats | 1.333 INCHES MINIMUM AND 1.353 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Reference | Meaning |
|---|---|
| BACR10Y6D | 3/2 Design control — primary reference U.S. Government activity |
NSN 5340-01-050-7032 is a Retainer,nut and Bolt, classified under FSC 5340, Hardware, Commercial. Status: active.
Key specifications for 5340-01-050-7032: Surface Treatment Document and Classification: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE; Distance Between Mounting Hole Centers: 2.390 INCHES MINIMUM AND 2.410 INCHES MAXIMUM IN; Material Document and Classification: QQ-A-250/5, ALLOY ALCLAD 2024, T3 FED SPEC SINGLE MATERIAL RESPONSE; Mounting Hole Diameter: 0.281 INCHES MINIMUM AND 0.307 INCHES MAXIMUM IN. 9 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.