The Clamp,loop, cataloged under National Stock Number 5340-01-044-3506, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-01-044-3506 |
| Item Name | Clamp,loop |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Status | ACTIVE |
| Lug Hole Diameter | 0.189 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN |
| Cushioning Environmental Protection | WEATHER RESISTANT |
| Center to Center Distance Between Loop and Lug Hole | 0.858 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN |
| Distance From Outer Edge of Lug to Hole Center | 0.250 INCHES NOMINAL IN |
| Style Designator | RIGHT HAND CLAMP & BRACKET |
| Material Document and Classification | AMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION |
| Material Document and Classification | QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND |
| Diameter | 0.189 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN |
| Material Thickness | 0.048 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN |
| Lug Width | 0.500 INCHES NOMINAL IN |
| Distance From Loop Center to Tongue End | 1.093 INCHES NOMINAL IN |
| Specification/standard Data | 81205-BACC10K MANUFACTURERS SPECIFICATION |
| Tongue Hole Type | ROUND, UNTHREADED |
| Center to Center Distance Between Loop and Mounting Hole | 0.827 INCHES MINIMUM AND 0.859 INCHES MAXIMUM IN |
| Material | ALUMINUM ALLOY 2024 BAND |
| Material | RUBBER CHLOROPRENE CLASS CR CUSHION |
| Loop Inside Diameter | 0.859 INCHES MINIMUM AND 0.891 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Reference | Meaning |
|---|---|
| BACC10K14 | 5/2 Secondary reference U.S. Government activity |
| 5347786 | C/1 Advisory reference — outside the item-of-supply concept Naval Sea Systems Command |
| 794-14 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5340-01-044-3506 is a Clamp,loop, classified under FSC 5340, Hardware, Commercial. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 4420-01-232-8323. Verify interchangeability with system specifications before substitution.
Key specifications for 5340-01-044-3506: Lug Hole Diameter: 0.189 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN; Cushioning Environmental Protection: WEATHER RESISTANT; Center to Center Distance Between Loop and Lug Hole: 0.858 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN; Distance From Outer Edge of Lug to Hole Center: 0.250 INCHES NOMINAL IN. 17 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.