The Clamp,block,section, cataloged under National Stock Number 5340-01-044-0140, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. The manufacturer of record is Northrop Grumman Systems Corporation. Government technical data includes 14 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-01-044-0140 |
| Primary Part Number | A51L10103-25 |
| Item Name | Clamp,block,section |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Manufacturer | Northrop Grumman Systems Corporation |
| Status | ACTIVE |
| Mounting Hole Quantity | 22 |
| Clamping Hole Quantity | 66 |
| Distance From End to First Clamping Hole Center | 0.562 INCHES NOMINAL IN |
| Block Height | 0.450 INCHES NOMINAL0.450 INCHES NOMINAL IN |
| Style Designator | RECTANGULAR |
| Mounting Hole Diameter | 0.190 INCHES MINIMUM AND 0.190 INCHES MINIMUM AND 0.196 INCHES MAXIMUM0.196 INCHES MAXIMUM IN |
| Clamping Hole Diameter | 0.190 INCHES NOMINAL ALL HOLES IN |
| Center to Center Distance Between First and Third Clamping Holes | 0.892 INCHES NOMINAL IN |
| Distance From Center of Mounting Hole to Edge Along the Width | 0.192 INCHES NOMINAL0.192 INCHES NOMINAL IN |
| Distance From End to First Mounting Hole Center | 0.250 INCHES NOMINAL IN |
| Mounting Facility | UNTHREADED HOLE(S)UNTHREADED HOLE(S) |
| Center to Center Distance Between First and Second Mounting Holes | 1.500 INCHES NOMINAL1.500 INCHES NOMINAL IN |
| Material | PLASTIC |
| Center to Center Distance Between First and Second Clamping Holes | 0.446 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Part Number | Manufacturer |
|---|---|
| A51L10103-25 PRIMARY | Northrop Grumman Systems Corporation (USA) |
| Reference | Meaning |
|---|---|
| A51L10103-25 | 3/9 Design control — primary reference Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Northrop Grumman Aeronautics Systems |
| A51L10103-25 | 5/9 Secondary reference Northrop Grumman Systems Corporation |
NSN 5340-01-044-0140 is a Clamp,block,section, manufactured by Northrop Grumman Systems Corporation, classified under FSC 5340, Hardware, Commercial. Status: active.
NSN 5340-01-044-0140 has 1 manufacturer part number on file: A51L10103-25 (Northrop Grumman Systems Corporation).
Key specifications for A51L10103-25: Mounting Hole Quantity: 22; Clamping Hole Quantity: 66; Distance From End to First Clamping Hole Center: 0.562 INCHES NOMINAL IN; Block Height: 0.450 INCHES NOMINAL0.450 INCHES NOMINAL IN. 14 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.