The Clamp,loop, cataloged under National Stock Number 5340-01-014-2463, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. Government technical data includes 9 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-01-014-2463 |
| Item Name | Clamp,loop |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Status | ACTIVE |
| Style Designator | SINGLE LOOP |
| Material Document and Classification | AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND |
| Material Thickness | 0.027 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN |
| Distance From Loop Center to Tongue End | 0.742 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN |
| Center to Center Distance Between Loop and Mounting Hole | 0.544 INCHES MINIMUM AND 0.549 INCHES MAXIMUM IN |
| Material | STEEL COMP 321 BAND |
| Slot Width | 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN |
| Slot Length | 0.235 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN |
| Loop Inside Diameter | 0.250 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Reference | Meaning |
|---|---|
| 4085T28P01 | 1/2 Source control — Government-approved source U.S. Government activity |
| 4085T28P01 | 3/2 Design control — primary reference U.S. Government activity |
| TA025027-04 | 5/9 Secondary reference U.S. Government activity |
NSN 5340-01-014-2463 is a Clamp,loop, classified under FSC 5340, Hardware, Commercial. Status: active.
Key specifications for 5340-01-014-2463: Style Designator: SINGLE LOOP; Material Document and Classification: AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND; Overall Width: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN; Material Thickness: 0.027 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN. 9 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.