The Fastener,pawl, cataloged under National Stock Number 5340-00-975-8199, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-00-975-8199 |
| Item Name | Fastener,pawl |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Status | ACTIVE |
| Operational Direction | RIGHT-HAND |
| Mounting Plate to Pawl Distance | 0.125 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN |
| Length | 1.469 INCHES NOMINAL IN |
| Center to Center Distance Between Mounting Holes | 0.812 INCHES NOMINAL IN |
| Pawl Actuation Method | KEY |
| Style Designator | KEY |
| Mounting Hole Diameter | 0.128 INCHES NOMINAL IN |
| Diameter | 0.344 INCHES NOMINAL IN |
| Pawl Type | OFFSET |
| Height | 1.125 INCHES NOMINAL IN |
| Surface Treatment | CHROMATE AND ZINC OVERALL |
| Width | 0.547 INCHES NOMINAL IN |
| Material | STEEL OVERALL |
| Pawl Length From Actuating Shaft Center to Pawl End | 0.625 INCHES NOMINAL IN |
| Knob Length | 0.125 INCHES NOMINAL IN |
| Pawl Swing Angle | 45.0 DEGREES NOMINAL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Reference | Meaning |
|---|---|
| 8702520-7 | 5/9 Secondary reference C Systems Llc Dba Craig Systems Dba Eastern Technologies |
| 43-1-13-0 | 3/2 Design control — primary reference U.S. Government activity |
| S14300002100 | 5/9 Secondary reference U.S. Government activity |
NSN 5340-00-975-8199 is a Fastener,pawl, classified under FSC 5340, Hardware, Commercial. Status: active.
Key specifications for 5340-00-975-8199: Operational Direction: RIGHT-HAND; Mounting Plate to Pawl Distance: 0.125 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN; Length: 1.469 INCHES NOMINAL IN; Center to Center Distance Between Mounting Holes: 0.812 INCHES NOMINAL IN. 16 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.