The Deflector,dirt and Liquid, cataloged under National Stock Number 5340-00-920-3326, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. The manufacturer of record is Us Army Aviation and Missile Command. Government technical data includes 10 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5340-00-920-3326 |
| Primary Part Number | 8511240 |
| Item Name | Deflector,dirt and Liquid |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Manufacturer | Us Army Aviation and Missile Command |
| Status | ACTIVE |
| Mounting Hole Quantity | 8 |
| Ozone Resistance | NOT OZONE RESISTANT |
| Material Document and Classification | QQ-A-601, ALLOY 356, TEMPER T6 FED SPEC SINGLE MATERIAL RESPONSE |
| Mounting Hole Diameter | 0.220 INCHES MINIMUM AND 0.236 INCHES MAXIMUM IN |
| Outside Diameter | 13.250 INCHES NOMINAL IN |
| Body Length | 0.625 INCHES NOMINAL IN |
| Inside Diameter | 11.680 INCHES NOMINAL IN |
| Surface Treatment | ANODIZE |
| Material | ALUMINUM ALLOY 356.0 |
| Mounting Hole Type | PLAIN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 8511240 PRIMARY | Us Army Aviation and Missile Command (USA) |
NSN 5340-00-920-3326 is a Deflector,dirt and Liquid, manufactured by Us Army Aviation and Missile Command, classified under FSC 5340, Hardware, Commercial. Status: active.
NSN 5340-00-920-3326 has 1 manufacturer part number on file: 8511240 (Us Army Aviation and Missile Command).
Key specifications for 8511240: Mounting Hole Quantity: 8; Ozone Resistance: NOT OZONE RESISTANT; Material Document and Classification: QQ-A-601, ALLOY 356, TEMPER T6 FED SPEC SINGLE MATERIAL RESPONSE; Mounting Hole Diameter: 0.220 INCHES MINIMUM AND 0.236 INCHES MAXIMUM IN. 10 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.