The Clevis,rod End, cataloged under National Stock Number 5340-00-839-3935, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. The manufacturer of record is Aerial Machine & Tool Corporation. Government technical data includes 18 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5340-00-839-3935 |
| Primary Part Number | 330 |
| Item Name | Clevis,rod End |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Manufacturer | Aerial Machine & Tool Corporation |
| Status | ACTIVE |
| Shank Diameter | 1.830 INCHES MINIMUM AND 1.850 INCHES MAXIMUM IN |
| Fork Span Width | 1.950 INCHES MINIMUM AND 1.960 INCHES MAXIMUM IN |
| Fork Arm Thickness | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | 299-099-031,CB3,BELL HELICOPTER CO MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM ROD CONNECTION IN |
| Shank Length | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN |
| Material Document and Classification | MIL-S-5626,COND C1 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000,COND C1 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-5000,COND C1 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| Angle | 45.0 DEGREES NOMINAL |
| Thread Direction | RIGHT-HAND ROD CONNECTION |
| Nominal Thread Size | 1.500 INCHES ROD CONNECTION IN |
| Surface Treatment | CADMIUM OVERALL |
| Thread Class | 3B ROD CONNECTION |
| Material | STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 4340 OVERALL |
| Thread Series Designator | UNF ROD CONNECTION |
| Fork Depth | 3.480 INCHES MINIMUM AND 3.520 INCHES MAXIMUM IN |
| Hole Diameter | 0.8743 INCHES MINIMUM AND 0.8746 INCHES MAXIMUM IN |
| Angle Height | 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN |
| Distance From Pivot Pinhole Center to Rod Connection End | 4.980 INCHES MINIMUM AND 5.020 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL B — Remove Demilitarization Key Points |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 330 | Aerial Machine & Tool Corporation (USA) |
| Reference | Meaning |
|---|---|
| 204-011-142-003 | 5/2 Secondary reference U.S. Government activity |
| 204-011-142-3 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5340-00-839-3935 is a Clevis,rod End, manufactured by Aerial Machine & Tool Corporation, classified under FSC 5340, Hardware, Commercial. Status: active.
NSN 5340-00-839-3935 has 1 manufacturer part number on file: 330 (Aerial Machine & Tool Corporation).
Key specifications for 330: Shank Diameter: 1.830 INCHES MINIMUM AND 1.850 INCHES MAXIMUM IN; Overall Height: 1.830 INCHES MINIMUM AND 1.850 INCHES MAXIMUM IN; Fork Span Width: 1.950 INCHES MINIMUM AND 1.960 INCHES MAXIMUM IN; Fork Arm Thickness: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN. 18 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
NSN 5340-00-839-3935 has DEMIL Code B. Demilitarization may be required before disposal or transfer to non-military entities.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.