The Handle,bow, cataloged under National Stock Number 5340-00-828-4797, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. The manufacturer of record is Lockheed Martin Corporation Div Rms. Government technical data includes 4 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-00-828-4797 |
| Primary Part Number | A3184 |
| Item Name | Handle,bow |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Manufacturer | Lockheed Martin Corporation Div Rms |
| Status | ACTIVE |
| Material Document and Classification | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Handle Clearance | 0.442 INCHES MINIMUM AND 0.652 INCHES MAXIMUM IN |
| Accommodated Shaft Diameter | 0.312 INCHES NOMINAL IN |
| Material | STEEL OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Part Number | Manufacturer |
|---|---|
| A3184 PRIMARY | Lockheed Martin Corporation Div Rms (USA) |
| Reference | Meaning |
|---|---|
| A3184 | 3/9 Design control — primary reference Martin Marietta Technologies Inc Sub of Martin Marietta Corp Aero and Naval Systems |
NSN 5340-00-828-4797 is a Handle,bow, manufactured by Lockheed Martin Corporation Div Rms, classified under FSC 5340, Hardware, Commercial. Status: active.
NSN 5340-00-828-4797 has 1 manufacturer part number on file: A3184 (Lockheed Martin Corporation Div Rms).
Key specifications for A3184: Material Document and Classification: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL; Overall Length: 5.562 INCHES NOMINAL IN; Handle Clearance: 0.442 INCHES MINIMUM AND 0.652 INCHES MAXIMUM IN; Accommodated Shaft Diameter: 0.312 INCHES NOMINAL IN. 4 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.