The Cup,compression, cataloged under National Stock Number 5340-00-805-4751, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. The manufacturer of record is Us Army Aviation and Missile Command. Government technical data includes 6 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5340-00-805-4751 |
| Primary Part Number | 8017016 |
| Item Name | Cup,compression |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Manufacturer | Us Army Aviation and Missile Command |
| Status | ACTIVE |
| Feather Edge Angle | 17.0 DEGREES NOMINAL |
| Overall Diameter | 1.281 INCHES MINIMUM AND 1.301 INCHES MAXIMUM IN |
| Recess Major Inside Diameter | 1.241 INCHES MINIMUM AND 1.261 INCHES MAXIMUM IN |
| Center Hole Diameter | 0.813 INCHES NOMINAL IN |
| Base Material Thickness | 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN |
| Material | RUBBER OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 8017016 PRIMARY | Us Army Aviation and Missile Command (USA) |
NSN 5340-00-805-4751 is a Cup,compression, manufactured by Us Army Aviation and Missile Command, classified under FSC 5340, Hardware, Commercial. Status: active.
NSN 5340-00-805-4751 has 1 manufacturer part number on file: 8017016 (Us Army Aviation and Missile Command).
1 possible match (shared part number, not a government interchangeability claim): 2530-01-077-8850. Verify interchangeability with system specifications before substitution.
Key specifications for 8017016: Feather Edge Angle: 17.0 DEGREES NOMINAL; Overall Diameter: 1.281 INCHES MINIMUM AND 1.301 INCHES MAXIMUM IN; Overall Length: 0.281 INCHES NOMINAL IN; Recess Major Inside Diameter: 1.241 INCHES MINIMUM AND 1.261 INCHES MAXIMUM IN. 6 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.