The Clamp,loop, cataloged under National Stock Number 5340-00-797-8729, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. The manufacturer of record is U S Army Tank Automotive Command Amsta-Im-Mm. Government technical data includes 10 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5340-00-797-8729 |
| Primary Part Number | 7978729 |
| Item Name | Clamp,loop |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Manufacturer | U S Army Tank Automotive Command Amsta-Im-Mm |
| Status | ACTIVE |
| Distance From Outer Edge of Lug to Hole Center | 0.438 INCHES NOMINAL IN |
| Distance From Loop Center to Base of Offset Tongue | 1.156 INCHES NOMINAL IN |
| Material Document and Classification | QQ-S-00640 FED SPEC SINGLE MATERIAL RESPONSE BAND |
| Diameter | 0.219 INCHES NOMINAL IN |
| Material Thickness | 0.0299 INCHES NOMINAL IN |
| Distance From Loop Center to Tongue End | 1.469 INCHES NOMINAL IN |
| Tongue Hole Type | ROUND, UNTHREADED |
| Center to Center Distance Between Loop and Mounting Hole | 0.969 INCHES NOMINAL IN |
| Material | STEEL BAND |
| Loop Inside Diameter | 0.750 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 7978729 PRIMARY | U S Army Tank Automotive Command Amsta-Im-Mm (USA) |
NSN 5340-00-797-8729 is a Clamp,loop, manufactured by U S Army Tank Automotive Command Amsta-Im-Mm, classified under FSC 5340, Hardware, Commercial. Status: active.
NSN 5340-00-797-8729 has 1 manufacturer part number on file: 7978729 (U S Army Tank Automotive Command Amsta-Im-Mm).
Key specifications for 7978729: Distance From Outer Edge of Lug to Hole Center: 0.438 INCHES NOMINAL IN; Distance From Loop Center to Base of Offset Tongue: 1.156 INCHES NOMINAL IN; Material Document and Classification: QQ-S-00640 FED SPEC SINGLE MATERIAL RESPONSE BAND; Diameter: 0.219 INCHES NOMINAL IN. 10 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.