PartsTable TECHNICAL DATA SHEET
NSN 5340-00-737-9005Government record, cited

Bracket, Angle5340-00-737-9005

NSN 5340-00-737-9005 · NIIN 007379005 · Part number 425564
Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney · FSC 5340 — Hardware, Commercial · FSG 53 — Hardware and Abrasives · CAGE 77445
Government record, cited
NSN 5340-00-737-9005 — this item is cataloged by the U.S. Government under National Stock Number 5340-00-737-9005. Manufacturer of record part number: 425564.
Also searched as  5340-00-737-9005 · 5340007379005 · NIIN 007379005 · 00-737-9005 · FSC 5340 Hardware, Commercial · CAGE 77445 · 425564
Nearby stock numbers  ·
Features
  • Bracket,angle — FSC 5340
  • Second Leg Distance From Edge to Hole Center Along Length: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
  • First Leg Distance From Edge to Hole Center Along Length: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
  • First Leg Hole Diameter: 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
  • First Leg Angle: 66.0 DEGREES NOMINAL
  • First Leg Distance Between Hole Centers Along Width: 1.0260 INCHES NOMINAL IN
  • Second Leg Relationship to First Leg: NOT IDENTICAL
  • Second Leg Hole Diameter: 0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
Identification
  • NSN: 5340-00-737-9005
  • NIIN: 007379005
  • FSC: 5340 — Hardware, Commercial
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: 425564
  • Manufacturer: Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney
General Description

The Bracket,angle, cataloged under National Stock Number 5340-00-737-9005, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. The manufacturer of record is Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney. Government technical data includes 24 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.

Technical Specifications
ParameterValue
NSN5340-00-737-9005
Primary Part Number425564
Item NameBracket,angle
FSC / FSG5340 / 53 — Hardware, Commercial
ManufacturerRtx Corporation Dba Pratt & Whitney Div Pratt &whitney
StatusACTIVE
Second Leg Distance From Edge to Hole Center Along Length0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
First Leg Distance From Edge to Hole Center Along Length0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
First Leg Hole Diameter0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
First Leg Angle66.0 DEGREES NOMINAL
First Leg Distance Between Hole Centers Along Width1.0260 INCHES NOMINAL IN
Second Leg Relationship to First LegNOT IDENTICAL
Second Leg Hole Diameter0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
First Leg Corner Radius0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
Second Leg Width0.818 INCHES MINIMUM AND 0.958 INCHES MAXIMUM IN
Second Leg Length0.918 INCHES MINIMUM AND 0.958 INCHES MAXIMUM IN
First Leg Hole Arrangement StyleTWO HOLES
Second Leg Distance From Edge to Hole Center Along Width0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
Style DesignatorANGLE
First Leg StyleCORNER RADIUS
Material Document and ClassificationMS 5525 ASSN STD SINGLE MATERIAL RESPONSE
Second Leg Thickness0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
First Leg Distance From Edge to Hole Center Along Width0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
First Leg Thickness0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
First Leg Length0.761 INCHES MINIMUM AND 0.801 INCHES MAXIMUM IN
First Leg Width1.506 INCHES MINIMUM AND 1.546 INCHES MAXIMUM IN
Second Leg StyleEND RADIUS
Second Leg End Radius0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
MaterialIRON ALLOY 660
Second Leg Hole Arrangement StyleONE HOLE
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Unit of IssueEA
Cross-Reference Index
Part NumberManufacturer
425564 Dcp Spring Acquisition Company, Inc. Dba New England Spring Div New England Spring (USA)
425564 Satellite Aerospace, Incorporated Dba Satellite Aerospace Inc (USA)
425564 PRIMARY Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney (USA)
Reference documents
ReferenceMeaning
425564 5/9 Secondary reference
U.S. Government activity
425564 5/9 Secondary reference
Trego Inc
No interchangeability data on file.
Other items in FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068
COVER,ACCESS
5340-00-000-0132
SEAT,HELICAL COMPRESSION SPRING
5340-00-000-8150
5340-00-000-8150 · Item name not on file
5340-00-001-1251
5340-00-001-1251 · Item name not on file
5340-00-001-1264
STRAP,WEBBING
5340-00-001-1265
STRAP,WEBBING
5340-00-001-1266
STRAP,WEBBING
5340-00-001-1275
HANDLE,DOOR

Frequently Asked Questions

What is NSN 5340-00-737-9005?

NSN 5340-00-737-9005 is a Bracket,angle, manufactured by Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney, classified under FSC 5340, Hardware, Commercial. Status: active.

What part numbers are listed for NSN 5340-00-737-9005?

NSN 5340-00-737-9005 has 3 manufacturer part numbers on file: 425564 (Dcp Spring Acquisition Company, Inc. Dba New England Spring Div New England Spring), 425564 (Satellite Aerospace, Incorporated Dba Satellite Aerospace Inc), 425564 (Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney).

What are the specifications of 425564?

Key specifications for 425564: Second Leg Distance From Edge to Hole Center Along Length: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN; First Leg Distance From Edge to Hole Center Along Length: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN; First Leg Hole Diameter: 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN; First Leg Angle: 66.0 DEGREES NOMINAL. 24 specifications are documented in the U.S. Government catalog.

Is NSN 5340-00-737-9005 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com