The Bracket,angle, cataloged under National Stock Number 5340-00-691-0169, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. The manufacturer of record is Dcp Spring Acquisition Company, Inc. Dba New England Spring Div New England Spring. Government technical data includes 26 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-00-691-0169 |
| Primary Part Number | 503233 |
| Item Name | Bracket,angle |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Manufacturer | Dcp Spring Acquisition Company, Inc. Dba New England Spring Div New England Spring |
| Status | ACTIVE |
| Second Leg Distance From Edge to Hole Center Along Length | 0.250 INCHES NOMINAL IN |
| First Leg Distance From Edge to Hole Center Along Length | 0.250 INCHES NOMINAL IN |
| First Leg Hole Diameter | 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN |
| First Leg Angle | 102.0 DEGREES NOMINAL |
| Second Leg Relationship to First Leg | NOT IDENTICAL |
| Second Leg Hole Diameter | 0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE |
| Second Leg Width | 0.500 INCHES NOMINAL IN |
| Second Leg Length | 2.215 INCHES NOMINAL IN |
| First Leg Hole Arrangement Style | ONE HOLE |
| Second Leg Distance From Edge to Hole Center Along Width | 0.250 INCHES NOMINAL IN |
| Style Designator | OFFSET ANGLE |
| First Leg Style | END RADIUS |
| Material Document and Classification | AMS 6350 ASSN STD 1ST MATERIAL RESPONSE OR AMS 6355 ASSN STD 2ND MATERIAL RESPONSE |
| Second Leg Thickness | 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN |
| First Leg Distance From Edge to Hole Center Along Width | 0.250 INCHES NOMINAL IN |
| First Leg Thickness | 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN |
| First Leg Length | 0.750 INCHES NOMINAL IN |
| First Leg Width | 0.500 INCHES NOMINAL IN |
| Second Leg Style | END RADIUS |
| Second Leg End Radius | 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM |
| Second Leg Offset Angle | 35.0 DEGREES NOMINAL |
| First Leg End Radius | 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN |
| Material | STEEL COMP 4130 OR STEEL COMP 8630 |
| Second Leg Hole Arrangement Style | ONE HOLE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Part Number | Manufacturer |
|---|---|
| 503233 PRIMARY | Dcp Spring Acquisition Company, Inc. Dba New England Spring Div New England Spring (USA) |
| 503233 | Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney (USA) |
| Reference | Meaning |
|---|---|
| 503233 | 5/9 Secondary reference Royal Oak Gage, Inc |
NSN 5340-00-691-0169 is a Bracket,angle, manufactured by Dcp Spring Acquisition Company, Inc. Dba New England Spring Div New England Spring, classified under FSC 5340, Hardware, Commercial. Status: active.
NSN 5340-00-691-0169 has 2 manufacturer part numbers on file: 503233 (Dcp Spring Acquisition Company, Inc. Dba New England Spring Div New England Spring), 503233 (Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney).
1 possible match (shared part number, not a government interchangeability claim): 4140-01-112-8146. Verify interchangeability with system specifications before substitution.
Key specifications for 503233: Second Leg Distance From Edge to Hole Center Along Length: 0.250 INCHES NOMINAL IN; First Leg Distance From Edge to Hole Center Along Length: 0.250 INCHES NOMINAL IN; First Leg Hole Diameter: 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN; First Leg Angle: 102.0 DEGREES NOMINAL. 26 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.