The Fastener,pawl, cataloged under National Stock Number 5340-00-659-5032, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. The manufacturer of record is Lockheed Martin Corporation Div Rms. Government technical data includes 16 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5340-00-659-5032 |
| Primary Part Number | 7706117P3 |
| Item Name | Fastener,pawl |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Manufacturer | Lockheed Martin Corporation Div Rms |
| Status | ACTIVE |
| Operational Direction | LEFT-HAND OR RIGHT-HAND |
| Mounting Plate to Pawl Distance | 0.125 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN |
| Length | 1.531 INCHES NOMINAL IN |
| Center to Center Distance Between Mounting Holes | 1.125 INCHES NOMINAL IN |
| Pawl Actuation Method | KNOB |
| Style Designator | KNURLED |
| Mounting Hole Diameter | 0.250 INCHES NOMINAL IN |
| Diameter | 0.875 INCHES NOMINAL IN |
| Pawl Type | OFFSET |
| Height | 2.500 INCHES NOMINAL IN |
| Surface Treatment | ZINC OVERALL |
| Width | 1.250 INCHES NOMINAL IN |
| Material | STEEL COMP 1010 AND IRON MALLEABLE OVERALL |
| Pawl Length From Actuating Shaft Center to Pawl End | 1.344 INCHES NOMINAL IN |
| Knob Length | 0.828 INCHES NOMINAL IN |
| Pawl Swing Angle | 90.0 DEGREES NOMINAL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | N |
NSN 5340-00-659-5032 is a Fastener,pawl, manufactured by Lockheed Martin Corporation Div Rms, classified under FSC 5340, Hardware, Commercial. Status: active.
NSN 5340-00-659-5032 has 2 manufacturer part numbers on file: 7706117P3 (Lockheed Martin Corporation Div Rms), 7706117P3 (General Electric Company).
Key specifications for 7706117P3: Operational Direction: LEFT-HAND OR RIGHT-HAND; Mounting Plate to Pawl Distance: 0.125 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN; Length: 1.531 INCHES NOMINAL IN; Center to Center Distance Between Mounting Holes: 1.125 INCHES NOMINAL IN. 16 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.