The Bracket,angle, cataloged under National Stock Number 5340-00-646-7219, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-00-646-7219 |
| Item Name | Bracket,angle |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Status | ACTIVE |
| First Leg Distance From Edge to Hole Center Along Length | 0.450 INCHES NOMINAL IN |
| First Leg Hole Diameter | 0.430 INCHES NOMINAL IN |
| First Leg Angle | 90.0 DEGREES NOMINAL |
| First Leg Distance Between Hole Centers Along Width | 1.600 INCHES NOMINAL IN |
| Second Leg Hole Diameter | 0.136 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN |
| Second Leg Length | 0.930 INCHES NOMINAL IN |
| First Leg Hole Arrangement Style | TWO HOLES |
| Style Designator | ANGLE |
| First Leg Style | SQUARE |
| Material Document and Classification | QQ-A-200/3 FED SPEC 1ST MATERIAL RESPONSE AND QQ-A-200/11 FED SPEC 2ND MATERIAL RESPONSE |
| First Leg Distance From Edge to Hole Center Along Width | 0.400 INCHES NOMINAL IN |
| First Leg Length | 0.850 INCHES NOMINAL IN |
| First Leg Width | 2.400 INCHES NOMINAL IN |
| Second Leg Style | ANGLE |
| Second Leg End Width | 1.180 INCHES NOMINAL IN |
| Material | ALUMINUM ALLOY 2024 AND ALUMINUM ALLOY 7075 |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Reference | Meaning |
|---|---|
| 60-4073 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5340-00-646-7219 is a Bracket,angle, classified under FSC 5340, Hardware, Commercial. Status: active.
Key specifications for 5340-00-646-7219: First Leg Distance From Edge to Hole Center Along Length: 0.450 INCHES NOMINAL IN; First Leg Hole Diameter: 0.430 INCHES NOMINAL IN; First Leg Angle: 90.0 DEGREES NOMINAL; First Leg Distance Between Hole Centers Along Width: 1.600 INCHES NOMINAL IN. 16 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.