The Clevis,rod End, cataloged under National Stock Number 5340-00-617-9804, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-00-617-9804 |
| Item Name | Clevis,rod End |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Status | ACTIVE |
| Fork Span Width | 0.090 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN |
| Fork Arm Thickness | 0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN |
| Overall Diameter | 0.400 INCHES NOMINAL IN |
| End Radius | 0.250 INCHES NOMINAL IN |
| Thread Length | 1.150 INCHES NOMINAL ROD CONNECTION IN |
| Style Designator | CLEVIS |
| Material Document and Classification | S95B,FSCM K0289 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| Thread Direction | RIGHT-HAND ROD CONNECTION |
| Nominal Thread Size | 0.147 INCHES ROD CONNECTION IN |
| Thread Class | 2B ROD CONNECTION |
| Material | STEEL OVERALL |
| Thread Series Designator | UNF ROD CONNECTION |
| Hole Diameter | 0.156 INCHES NOMINAL IN |
| Distance From Pivot Pinhole Center to Rod Connection End | 1.750 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Reference | Meaning |
|---|---|
| F295868 | 3/9 Design control — primary reference British Aerospace (military Aircraft & Aerostructures) |
| F295868 | C/1 Advisory reference — outside the item-of-supply concept Bae Systems (operations) Limited |
NSN 5340-00-617-9804 is a Clevis,rod End, classified under FSC 5340, Hardware, Commercial. Status: active.
Key specifications for 5340-00-617-9804: Fork Span Width: 0.090 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN; Fork Arm Thickness: 0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN; Overall Diameter: 0.400 INCHES NOMINAL IN; End Radius: 0.250 INCHES NOMINAL IN. 14 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.