The Bracket,angle, cataloged under National Stock Number 5340-00-536-7114, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. Government technical data includes 12 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5340-00-536-7114 |
| Item Name | Bracket,angle |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Status | ACTIVE |
| Second Leg Distance From Edge to Hole Center Along Length | 3.468 INCHES NOMINAL IN |
| First Leg Distance From Edge to Hole Center Along Length | 2.220 INCHES NOMINAL IN |
| First Leg Hole Diameter | 0.249 INCHES MINIMUM AND 0.264 INCHES MAXIMUM IN |
| Second Leg Hole Diameter | 0.687 INCHES NOMINAL IN |
| First Leg Hole Arrangement Style | THREE HOLES |
| Second Leg Distance From Edge to Hole Center Along Width | 2.781 INCHES NOMINAL IN |
| First Leg Style | CORNER RADIUS |
| First Leg Distance From Edge to Hole Center Along Width | 0.680 INCHES NOMINAL IN |
| First Leg Distance Between Second and Third Hole Centers Along Length | 2.220 INCHES NOMINAL IN |
| Second Leg Style | SQUARE |
| Material | ALUMINUM ALLOY |
| First Leg Distance Between First and Second Hole Centers Along Length | 2.718 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 8B241405-15 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5340-00-536-7114 is a Bracket,angle, classified under FSC 5340, Hardware, Commercial. Status: active.
Key specifications for 5340-00-536-7114: Second Leg Distance From Edge to Hole Center Along Length: 3.468 INCHES NOMINAL IN; First Leg Distance From Edge to Hole Center Along Length: 2.220 INCHES NOMINAL IN; First Leg Hole Diameter: 0.249 INCHES MINIMUM AND 0.264 INCHES MAXIMUM IN; Second Leg Hole Diameter: 0.687 INCHES NOMINAL IN. 12 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.