The Clamp,loop, cataloged under National Stock Number 5340-00-415-5295, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. The manufacturer of record is Pall Aeropower Corporation. Government technical data includes 11 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-00-415-5295 |
| Primary Part Number | AB9689-1D12 |
| Item Name | Clamp,loop |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Manufacturer | Pall Aeropower Corporation |
| Status | ACTIVE |
| Lug Hole Diameter | 0.193 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN |
| Center to Center Distance Between Loop and Lug Hole | 1.044 INCHES MINIMUM AND 1.046 INCHES MAXIMUM IN |
| Distance From Outer Edge of Lug to Hole Center | 0.310 INCHES NOMINAL IN |
| Material Thickness | 0.212 INCHES NOMINAL IN |
| Lug Width | 0.620 INCHES NOMINAL IN |
| Distance From Loop Center to Tongue End | 1.355 INCHES NOMINAL IN |
| Nominal Thread Size | 0.164 INCHES IN |
| Surface Treatment | ANODIZE OVERALL |
| Center to Center Distance Between Loop and Mounting Hole | 0.520 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN |
| Material | ALUMINUM ALLOY 2024 OVERALL |
| Loop Inside Diameter | 0.836 INCHES MINIMUM AND 0.840 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Part Number | Manufacturer |
|---|---|
| AB9689-1D12 PRIMARY | Pall Aeropower Corporation (USA) |
NSN 5340-00-415-5295 is a Clamp,loop, manufactured by Pall Aeropower Corporation, classified under FSC 5340, Hardware, Commercial. Status: active.
NSN 5340-00-415-5295 has 1 manufacturer part number on file: AB9689-1D12 (Pall Aeropower Corporation).
Key specifications for AB9689-1D12: Lug Hole Diameter: 0.193 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN; Center to Center Distance Between Loop and Lug Hole: 1.044 INCHES MINIMUM AND 1.046 INCHES MAXIMUM IN; Distance From Outer Edge of Lug to Hole Center: 0.310 INCHES NOMINAL IN; Overall Width: 0.900 INCHES NOMINAL IN. 11 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.