The Bracket,angle, cataloged under National Stock Number 5340-00-338-3085, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. Government technical data includes 13 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-00-338-3085 |
| Item Name | Bracket,angle |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Status | ACTIVE |
| First Leg Distance From Edge to Hole Center Along Length | 0.380 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN |
| First Leg Hole Diameter | 0.227 INCHES MINIMUM AND 0.233 INCHES MAXIMUM IN |
| First Leg Angle | 90.0 DEGREES NOMINAL |
| Second Leg Length | 1.770 INCHES MINIMUM AND 1.830 INCHES MAXIMUM IN |
| First Leg Hole Arrangement Style | ONE HOLE |
| Style Designator | ANGLE |
| First Leg Style | CORNER RADIUS |
| Second Leg Thickness | 0.016 INCHES NOMINAL IN |
| First Leg Distance From Edge to Hole Center Along Width | 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN |
| First Leg Thickness | 0.016 INCHES NOMINAL IN |
| First Leg Length | 0.870 INCHES MINIMUM AND 0.930 INCHES MAXIMUM IN |
| First Leg Width | 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN |
| Material | TITANIUM ALLOY |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Reference | Meaning |
|---|---|
| LS5988-1T016 | 5/9 Secondary reference U.S. Government activity |
| LS5377-5T | 3/2 Design control — primary reference U.S. Government activity |
NSN 5340-00-338-3085 is a Bracket,angle, classified under FSC 5340, Hardware, Commercial. Status: active.
Key specifications for 5340-00-338-3085: First Leg Distance From Edge to Hole Center Along Length: 0.380 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN; First Leg Hole Diameter: 0.227 INCHES MINIMUM AND 0.233 INCHES MAXIMUM IN; First Leg Angle: 90.0 DEGREES NOMINAL; Second Leg Length: 1.770 INCHES MINIMUM AND 1.830 INCHES MAXIMUM IN. 13 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.