The Rod End,threaded, cataloged under National Stock Number 5340-00-321-9004, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-00-321-9004 |
| Item Name | Rod End,threaded |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Status | ACTIVE |
| Unthreaded End Outside Diameter | 0.623 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN |
| Flange Diameter | 0.069 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | LC+77-1061,CAGE 36659 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| Unthreaded End Depth | 1.370 INCHES NOMINAL IN |
| Thread Length | 0.560 INCHES NOMINAL ROD CONNECTION IN |
| Style Designator | EXTERNAL THREAD, FLANGED, TUBULAR END |
| Material Document and Classification | MIL-S-6758,COND F4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Unthreaded End Length | 1.370 INCHES NOMINAL IN |
| Thread Direction | RIGHT-HAND OVERALL |
| Nominal Thread Size | 0.375 INCHES ROD CONNECTION IN |
| Surface Treatment | CADMIUM OVERALL |
| Flange Width | 0.100 INCHES NOMINAL IN |
| Thread Class | 3B OVERALL |
| Test Data Document | 36659-LC+72-1076 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Material | STEEL COMP 4130 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) ROD CONNECTION |
| Unthreaded End Inside Diameter | 0.452 INCHES MINIMUM AND 0.459 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Reference | Meaning |
|---|---|
| 1292173-105 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5340-00-321-9004 is a Rod End,threaded, classified under FSC 5340, Hardware, Commercial. Status: active.
Key specifications for 5340-00-321-9004: Unthreaded End Outside Diameter: 0.623 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN; Flange Diameter: 0.069 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN; Surface Treatment Document and Classification: LC+77-1061,CAGE 36659 MFR REF SINGLE TREATMENT RESPONSE OVERALL; Unthreaded End Depth: 1.370 INCHES NOMINAL IN. 17 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.