The Connector,rod End, cataloged under National Stock Number 5340-00-213-4810, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5340-00-213-4810 |
| Item Name | Connector,rod End |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Status | ACTIVE |
| Tongue Thickness | 0.250 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN |
| Tongue Width | 0.562 INCHES NOMINAL IN |
| Length | 1.220 INCHES NOMINAL SHOULDER IN |
| Securing Pin Hole Diameter | 0.061 INCHES MINIMUM AND 0.066 INCHES MAXIMUM IN |
| Radius | 0.400 INCHES NOMINAL IN |
| Style Designator | CONNECTOR |
| Material Document and Classification | MIL-S-6050 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Distance From End to Hole Center | 2.280 INCHES NOMINAL IN |
| Rod Connection Bore Diameter | 0.500 INCHES NOMINAL IN |
| Rod Connection Bore Depth | 0.840 INCHES NOMINAL IN |
| Material | STEEL COMP 8630 OVERALL |
| Body Overall Diameter | 0.870 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN |
| Distance From Center of Securing Pin Hole to Rod End | 1.030 INCHES NOMINAL IN |
| Metallic Hardness Rating | 27.0 MINIMUM ROCKWELL C AND 32.0 MAXIMUM ROCKWELL C |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 175013-9 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5340-00-213-4810 is a Connector,rod End, classified under FSC 5340, Hardware, Commercial. Status: active.
Key specifications for 5340-00-213-4810: Tongue Thickness: 0.250 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN; Tongue Width: 0.562 INCHES NOMINAL IN; Length: 1.220 INCHES NOMINAL SHOULDER IN; Securing Pin Hole Diameter: 0.061 INCHES MINIMUM AND 0.066 INCHES MAXIMUM IN. 14 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.