The Plate,retaining,seal, cataloged under National Stock Number 5340-00-175-0834, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. The manufacturer of record is Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-00-175-0834 |
| Primary Part Number | 209566PC13 |
| Item Name | Plate,retaining,seal |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Manufacturer | Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier |
| Status | ACTIVE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Part Number | Manufacturer |
|---|---|
| 209566PC13 | Lockheed Martin Corporation Div Rms - Mitchel Field (USA) |
| 209566PC13 PRIMARY | Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier (USA) |
| 209566PC13 | Quadriel Inc (USA) |
NSN 5340-00-175-0834 is a Plate,retaining,seal, manufactured by Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier, classified under FSC 5340, Hardware, Commercial. Status: active.
NSN 5340-00-175-0834 has 3 manufacturer part numbers on file: 209566PC13 (Lockheed Martin Corporation Div Rms - Mitchel Field), 209566PC13 (Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier), 209566PC13 (Quadriel Inc).
Key specifications for 209566PC13: Special Features: THE RETAINER IS MADE OF STEEL PER QQ-S-763,CL 6,TYPE C; THE OD IS A MIN. 1.115 INCHES AND MAX. OF 1.120 INCHES+ THE ID IS MIN. 0.4375 INCHES AND MAX. OF 0.4377 INCHES; THE BODY OUTSIDE OF DIA. MIN. 0.L810 INCHES AND MAX. OF 0.811 INCHES; FLANGE WIDTH IS 0.060 INCHES; THE OVERALL LENGTH IS 0.160 INCHES; THE TWO HOLES ARE NUMBER 43 DRILLED C'SINK 82 DEGREES BY 0.020 INCHES DEEP; THE HOLES ARE LOCATED 0.312 INCHES PLUS OR MINUS 0.002 INCHES FROM CENTER OF ID ON EITHER SIDE OF ID IN. 0 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.