The Clamp,loop, cataloged under National Stock Number 5340-00-174-4827, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. The manufacturer of record is Aero-Plastics, Inc.. Government technical data includes 10 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-00-174-4827 |
| Primary Part Number | AP1001N8 |
| Item Name | Clamp,loop |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Manufacturer | Aero-Plastics, Inc. |
| Status | ACTIVE |
| Cushioning Environmental Protection | WEATHER RESISTANT |
| Distance From Outer Edge of Lug to Hole Center | 0.225 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN |
| Material Document and Classification | MIL-M-20693 MIL SPEC SINGLE MATERIAL RESPONSE BAND |
| Diameter | 0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN |
| Material Thickness | 0.085 INCHES MINIMUM AND 0.105 INCHES MAXIMUM IN |
| Distance From Loop Center to Tongue End | 0.889 INCHES NOMINAL IN |
| Tongue Hole Type | ROUND, UNTHREADED |
| Center to Center Distance Between Loop and Mounting Hole | 0.614 INCHES MINIMUM AND 0.664 INCHES MAXIMUM IN |
| Material | PLASTIC POLYHEXAMETHYLENE AMIDE BAND |
| Material | PLASTIC POLYAMIDE NYLON CUSHION |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Part Number | Manufacturer |
|---|---|
| AP1001N8 PRIMARY | Aero-Plastics, Inc. (USA) |
NSN 5340-00-174-4827 is a Clamp,loop, manufactured by Aero-Plastics, Inc., classified under FSC 5340, Hardware, Commercial. Status: active.
NSN 5340-00-174-4827 has 1 manufacturer part number on file: AP1001N8 (Aero-Plastics, Inc.).
Key specifications for AP1001N8: Cushioning Environmental Protection: WEATHER RESISTANT; Distance From Outer Edge of Lug to Hole Center: 0.225 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN; Material Document and Classification: MIL-M-20693 MIL SPEC SINGLE MATERIAL RESPONSE BAND; Diameter: 0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN. 10 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.