The Clevis,rod End, cataloged under National Stock Number 5340-00-009-3826, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-00-009-3826 |
| Item Name | Clevis,rod End |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Status | ACTIVE |
| Shank Diameter | 0.400 INCHES NOMINAL IN |
| Fork Span Width | 0.260 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN |
| Securing Pin Hole Diameter | 0.108 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN |
| Fork Arm Thickness | 0.150 INCHES NOMINAL IN |
| End Radius | 0.438 INCHES NOMINAL IN |
| Thread Length | 0.406 INCHES NOMINAL ROD CONNECTION IN |
| Shank Length | 1.638 INCHES MINIMUM AND 1.644 INCHES MAXIMUM IN |
| Style Designator | CLEVIS |
| Material Document and Classification | 6AL-6V-2SN,CAGE 26512 MFR REF SINGLE MATERIAL RESPONSE OVERALL V |
| Shank Shoulder Diameter | 0.496 INCHES MINIMUM AND 0.498 INCHES MAXIMUM IN |
| Thread Direction | RIGHT-HAND ROD CONNECTION |
| Nominal Thread Size | 0.375 INCHES ROD CONNECTION IN |
| Thread Class | 3A ROD CONNECTION A |
| Test Data Document | 81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Material | TITANIUM ALLOY OVERALL |
| Distance From Center of Securing Pin Hole to Rod End | 0.200 INCHES NOMINAL IN |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) ROD CONNECTION |
| Fork Depth | 0.525 INCHES NOMINAL IN |
| Hole Diameter | 0.2500 INCHES MINIMUM AND 0.2504 INCHES MAXIMUM IN |
| Distance From Pivot Pinhole Center to Rod Connection End | 2.729 INCHES MINIMUM AND 2.735 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Reference | Meaning |
|---|---|
| A51G10505-11 | 3/9 Design control — primary reference Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Northrop Grumman Aeronautics Systems |
| A51G10505-11 | 5/9 Secondary reference Northrop Grumman Systems Corporation |
| A51G10505-11 | C/1 Advisory reference — outside the item-of-supply concept Northrop Grumman Systems Corporation |
NSN 5340-00-009-3826 is a Clevis,rod End, classified under FSC 5340, Hardware, Commercial. Status: active.
Key specifications for 5340-00-009-3826: Shank Diameter: 0.400 INCHES NOMINAL IN; Fork Span Width: 0.260 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN; Securing Pin Hole Diameter: 0.108 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN; Fork Arm Thickness: 0.150 INCHES NOMINAL IN. 20 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.