PartsTable
Technical Data Sheet
Download PDF

5338464 — PACKING MATERIAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5338464: PACKING MATERIAL.

The PACKING MATERIAL is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, style_designator: CIRCULAR, aperture_diameter: 87.200 INCHES NOMINAL IN, end_item_identification: MK25MOD14,CARRIAGE,5 INCH IN, cross-sectional_shape_style: CIRCULAR, cross_section_outside_diameter: 88.520 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-144-9145, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5338464
NSN: 5330-00-144-9145
NIINs: 001449145, 013053512
FSC: 5330 — Packing and Gasket Materials
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
style_designatorCIRCULAR
aperture_diameter87.200 INCHES NOMINAL IN
end_item_identificationMK25MOD14,CARRIAGE,5 INCH IN
cross-sectional_shape_styleCIRCULAR
cross_section_outside_diameter88.520 INCHES NOMINAL IN
NSN5330-00-144-9145
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5338464 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 278.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.630 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN
•
CROSS-SECTIONAL WIDTH: 1.125 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS
LENGTH278.000 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.630 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN
CROSS-SECTIONAL WIDTH1.125 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
SUBSTITUTES & CROSS-REFERENCES 1
215028PC1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5338464?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5338464?
5338464 is a PACKING MATERIAL.
What parts can replace 5338464?
There is 1 known substitute for 5338464: 215028PC1. Substitute compatibility should be verified for your specific system.
What is the NSN for 5338464?
5338464 is cataloged in the U.S. Government catalog under NSN 5330-00-144-9145. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5338464

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.