PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5336-7-16
5336-7-16 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUSHING,NONMETALLIC is a the manufacturer industrial component. Key specifications include special_features: BUSHING-REDUCER, 9/16 IN X 12 MM MM, part_name_assigned_by_controlling_agency: BUSHING-REDUCER. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-781-3919, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5336-7-16
NSN: 5340-00-781-3919
FSC: 5340
CAGE: 76786 — BUCKLES INTERNATIONAL, INC. (USA)
SPECIFICATIONS
special_featuresBUSHING-REDUCER, 9/16 IN X 12 MM MM
part_name_assigned_by_controlling_agencyBUSHING-REDUCER
NSN5340-00-781-3919
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5336-7-16 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: COPPER ALLOY 511 BLADE
•
DESIGN TYPE: FIXED
•
END POSITION: CONNECTION END AT RIGHT ANGLE TO PLANE OF HOOK END
•
UNATTACHED RING: NOT INCLUDED
•
HOOK STYLE DESIGNATOR: SPRING BLADE
•
RUBBER COVERED FEATURE: NOT INCLUDED
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALCOPPER ALLOY 511 BLADE
MATERIALCOPPER ALLOY HOOK
MATERIALCOPPER ALLOY CONNECTION END
DESIGN TYPEFIXED
END POSITIONCONNECTION END AT RIGHT ANGLE TO PLANE OF HOOK END
UNATTACHED RINGNOT INCLUDED
HOOK STYLE DESIGNATORSPRING BLADE
RUBBER COVERED FEATURENOT INCLUDED
INSIDE DIAMETER0.437 INCHES MINIMUM AND 0.452 INCHES MAXIMUM IN
OVERALL LENGTH1.810 INCHES MINIMUM AND 1.940 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
J11002106-21Interchangeable
interchangeable cross-reference
interchangeable
JHP24-63Interchangeable
interchangeable cross-reference
interchangeable
354B892G01Interchangeable
interchangeable cross-reference
interchangeable
5336AInterchangeable
interchangeable cross-reference
interchangeable
6163989Interchangeable
interchangeable cross-reference
interchangeable
E6T5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5336-7-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5336-7-16?
5336-7-16 is a BUSHING,NONMETALLIC.
What parts can replace 5336-7-16?
There are 21 known substitutes for 5336-7-16: J11002106-21, JHP24-63, 354B892G01 and 18 more. Substitute compatibility should be verified for your specific system.
Is 5336-7-16 still available?
5336-7-16 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5336-7-16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026