PartsTable
Technical Data Sheet
53325 ✓ Verified by PartsTable
Hama · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

- Allows serial devices to be connected to a USB port.<br>- Suitable for most of the serial devices.<br>- Supports data rates between 1200 and 115 200 kbps.<br>- Hot plug-and-play.<br>- Very easy installation.<br>- Power supply via the USB interface (bus-powered).<br>- For Windows XP and Vista. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3163, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
53325
NSN: 3110-00-100-3163
FSC: 3110
CAGE: 34623 — AM GENERAL LLC (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 OVERALL
cone_width0.6875 INCHES NOMINAL IN
bore_diameter1.0625 INCHES NOMINAL IN
overall_length1.312 INCHES NOMINAL IN
shell_materialCOPPER ALLOY
insert_materialPLASTIC SINGLE MATING END
overall_diameter0.500 INCHES NOMINAL IN
style_designatorBALL
cone_corner_radius0.1406 INCHES NOMINAL IN
mating_end_quantity1
contact_removabilityNONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
included_contact_typeCOAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
NSN3110-00-100-3163
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 53325 · Hama ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
BORE DIAMETER: 1.0625 INCHES NOMINAL IN
MATERIAL: STEEL OVERALL
CONE WIDTH: 0.6875 INCHES NOMINAL IN
STYLE DESIGNATOR: NORMAL ANGLE
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
BORE DIAMETER1.0625 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
CONE WIDTH0.6875 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
15580Interchangeable
interchangeable cross-reference
interchangeable
53325Interchangeable
interchangeable cross-reference
interchangeable
5705873Interchangeable
interchangeable cross-reference
interchangeable
4880H20 3-16Interchangeable
interchangeable cross-reference
interchangeable
560-2-1236Interchangeable
interchangeable cross-reference
interchangeable
44-32610A01Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 53325?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 53325?
53325 is a CONNECTOR,PLUG,ELECTRICAL manufactured by Hama.
What parts can replace 53325?
There are 15 known substitutes for 53325: 15580, 53325, 5705873 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 53325?
53325 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3163. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 53325