PartsTable
Technical Data Sheet
Download PDF

533246 — BEARING,ROLLER,NEEDLE

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

533246: BEARING,ROLLER,NEEDLE.

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, bore_diameter: 0.2500 INCHES NOMINAL IN, overall_width: 0.2400 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, alignment_type: RIGID, surface_finish: GROUND, style_designator: NON-SEPARABLE, OPEN END, DRAWN SHELL. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-463-4817, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
533246
NSN: 3110-00-463-4817
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 5XMS1 — JTEKT BEARINGS NORTH AMERICA LLC DIV KBNA - ORD 1 (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
bore_diameter0.2500 INCHES NOMINAL IN
overall_width0.2400 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
alignment_typeRIGID
surface_finishGROUND
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
lubrication_materialGREASE
overall_outside_diameter0.4375 INCHES NOMINAL IN
retainer_fabrication_methodMACHINED
material_document_and_classificationFED-STD 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
lubrication_material_document_and_classificationUNI TEMP 500,TEXACO INC NATIONAL SPEC SINGLE MATERIAL RESPONSE
NSN3110-00-463-4817
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 533246 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
LUBRICATION MATERIAL: GREASE
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED-STD 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
•
OVERALL OUTSIDE DIAMETER: 0.4375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
LUBRICATION MATERIALGREASE
SURFACE FINISHGROUND
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
MATERIAL DOCUMENT AND CLASSIFICATIONFED-STD 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
MATERIAL DOCUMENT AND CLASSIFICATIONFED-STD 66 FED STD SINGLE MATERIAL RESPONSE ROLLER
OVERALL WIDTH0.2400 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER0.4375 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
BORE DIAMETER0.2500 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
GB44Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 533246?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 533246?
533246 is a BEARING,ROLLER,NEEDLE.
What parts can replace 533246?
There is 1 known substitute for 533246: GB44. Substitute compatibility should be verified for your specific system.
What is the NSN for 533246?
533246 is cataloged in the U.S. Government catalog under NSN 3110-00-463-4817. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 533246