PartsTable
Technical Data Sheet
PartsTable / O-RING / 5331PL1985914
5331PL1985914 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, temp_rating: -103.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 50.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.504 INCHES MINIMUM AND 1.540 INCHES MAXIMUM IN, center_hole_diameter: 1.333 INCHES MINIMUM AND 1.343 INCHES MAXIMUM IN, cross-sectional_height: 0.089 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-684-5098, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5331PL1985914
NSN: 5331-00-684-5098
FSC: 5331 — O-RING
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q
temp_rating-103.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating50.0 SHORE DUROMETER A NOMINAL
outside_diameter1.504 INCHES MINIMUM AND 1.540 INCHES MAXIMUM IN
center_hole_diameter1.333 INCHES MINIMUM AND 1.343 INCHES MAXIMUM IN
cross-sectional_height0.089 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
NSN5331-00-684-5098
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5331PL1985914 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SILICONE CLASS Q
•
CENTER HOLE DIAMETER: 1.333 INCHES MINIMUM AND 1.343 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.089 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
•
TEMP RATING: -103.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
OUTSIDE DIAMETER: 1.504 INCHES MINIMUM AND 1.540 INCHES MAXIMUM IN
•
HARDNESS RATING: 50.0 SHORE DUROMETER A NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SILICONE CLASS Q
CENTER HOLE DIAMETER1.333 INCHES MINIMUM AND 1.343 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.089 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
TEMP RATING-103.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
OUTSIDE DIAMETER1.504 INCHES MINIMUM AND 1.540 INCHES MAXIMUM IN
HARDNESS RATING50.0 SHORE DUROMETER A NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
012-500-0007Interchangeable
interchangeable cross-reference
interchangeable
NMP-623PC19Interchangeable
interchangeable cross-reference
interchangeable
8RD2035Interchangeable
interchangeable cross-reference
interchangeable
TVR24-13Interchangeable
interchangeable cross-reference
interchangeable
70C44309C01Interchangeable
interchangeable cross-reference
interchangeable
5157Interchangeable
IBM 575 Watt Power Supply
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5331PL1985914?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5331PL1985914?
5331PL1985914 is a O-RING.
What parts can replace 5331PL1985914?
There are 26 known substitutes for 5331PL1985914: 012-500-0007, NMP-623PC19, 8RD2035 and 23 more. Substitute compatibility should be verified for your specific system.
Is 5331PL1985914 still available?
5331PL1985914 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5331PL1985914

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026