PartsTable
Technical Data Sheet
PartsTable / O-RING / 5331PL1704484
5331PL1704484 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, outside_diameter: 2.887 INCHES NOMINAL IN, center_hole_diameter: 2.599 INCHES MINIMUM AND 2.619 INCHES MAXIMUM IN, elongation_percentage: 160 MAXIMUM, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-720-2535, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5331PL1704484
NSN: 5331-00-720-2535
FSC: 5331 — O-RING
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialRUBBER SYNTHETIC
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
outside_diameter2.887 INCHES NOMINAL IN
center_hole_diameter2.599 INCHES MINIMUM AND 2.619 INCHES MAXIMUM IN
elongation_percentage160 MAXIMUM
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-00-720-2535
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5331PL1704484 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC
•
CENTER HOLE DIAMETER: 2.599 INCHES MINIMUM AND 2.619 INCHES MAXIMUM IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 2.887 INCHES NOMINAL IN
•
ELONGATION PERCENTAGE: 160 MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC
CENTER HOLE DIAMETER2.599 INCHES MINIMUM AND 2.619 INCHES MAXIMUM IN
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.887 INCHES NOMINAL IN
ELONGATION PERCENTAGE160 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
AN6230-9Interchangeable
interchangeable cross-reference
interchangeable
AN6230-9SPCLNInterchangeable
interchangeable cross-reference
interchangeable
71869PC34Interchangeable
interchangeable cross-reference
interchangeable
SAE-AS28775Interchangeable
interchangeable cross-reference
interchangeable
MS28775-231Interchangeable
interchangeable cross-reference
interchangeable
LL-HX4-9574Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5331PL1704484?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5331PL1704484?
5331PL1704484 is a O-RING.
What parts can replace 5331PL1704484?
There are 14 known substitutes for 5331PL1704484: AN6230-9, AN6230-9SPCLN, 71869PC34 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5331PL1704484?
5331PL1704484 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-720-2535. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5331PL1704484

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026