PartsTable
Technical Data Sheet
PartsTable / O-RING / 5331PL1672846
5331PL1672846 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, center_hole_diameter: 1.161 INCHES MINIMUM AND 1.181 INCHES MAXIMUM IN, cross-sectional_height: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-448-8386, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5331PL1672846
NSN: 5331-01-448-8386
FSC: 5331 — O-RING
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
center_hole_diameter1.161 INCHES MINIMUM AND 1.181 INCHES MAXIMUM IN
cross-sectional_height0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
NSN5331-01-448-8386
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5331PL1672846 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.161 INCHES MINIMUM AND 1.181 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.161 INCHES MINIMUM AND 1.181 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
5331PL0813732Interchangeable
interchangeable cross-reference
interchangeable
M83461/2-902Interchangeable
interchangeable cross-reference
interchangeable
MIL-P-83461Interchangeable
interchangeable cross-reference
interchangeable
N0304 3-916Interchangeable
interchangeable cross-reference
interchangeable
17-916C0MP8250-8Interchangeable
interchangeable cross-reference
interchangeable
Q2535-16Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5331PL1672846?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5331PL1672846?
5331PL1672846 is a O-RING.
What parts can replace 5331PL1672846?
There are 29 known substitutes for 5331PL1672846: 5331PL0813732, M83461/2-902, MIL-P-83461 and 26 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5331PL1672846?
5331PL1672846 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-448-8386. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5331PL1672846

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026